
Aqueous extraction
Water and the plant, with no residual solvent.

Clean-label plant extraction: Ipowder® restores the plant’s whole totum

Patented technology

100% aqueous extraction, 0% solvent

ECOCERT-certified process

Made in France
Drawing on more than 35 years of plant expertise, PiLeJe CDMO has developed and patented Ipowder®: a process that concentrates the plant’s actives without ever denaturing them.
Ipowder® brings together the traditional use of the plant — water extraction — with the complete restoration of its totum (the plant’s full phytochemical spectrum), by redepositing the concentrated extract onto the native plant powder. The original phytochemical profile is preserved, with no denaturation.
The 3 stages of the process

Water and the plant, with no residual solvent.

Two stages of aqueous concentration, for an intense extract.

The concentrated extract is fixed directly onto the native plant powder.
1 dose = 2 to 3 doses
of standard plant powder, depending on the reference.

One dose of Ipowder® is equivalent to 2 to 3 doses of standard plant powder, depending on the reference. Your consumers get the same efficacy with a reduced intake frequency, to the benefit of adherence.

With no inert carrier, the native plant appears at the top of your ingredient list. Attractive labelling, aligned with clean-label expectations.

Ipowder® fits into your capsules, your sachets and your tablets, single-layer as well as bilayer.
Digestion, relaxation, immunity, joints, circulation: explore our concentrated, documented infusions, with high levels of compounds of interest. To be formulated alone or in synergy.

Artichoke (Cynara cardunculus, leaf), Lemon balm (Melissa officinalis, leaf), Black radish (Raphanus sativus, root)

California poppy (Eschscholzia californica, aerial parts), Passionflower (Passiflora incarnata, aerial parts), Valerian (Valeriana officinalis, root)

Echinacea (Echinacea purpurea, root), Eleuthero (Eleutherococcus senticosus, root), Maté (Ilex paraguariensis, leaf)

Blackcurrant (Ribes nigrum, leaf), Horsetail (Equisetum arvense, aerial parts), Meadowsweet (Filipendula ulmaria, flower)

Red vine (Vitis vinifera, leaf), Rosemary (Rosmarinus officinalis, leaf)
Ipowder® is manufactured in France, at the Saint-Bonnet-de-Rochefort site. You secure your market launch with a high-technology industrial facility and demanding quality standards.
n line with the European Pharmacopoeia.
The aqueous, non-selective process does not concentrate the contaminants commonly tested for (pesticides, heavy metals, mycotoxins), and every totum is subject to assessment.
an ECOCERT-certified process, for organic versions on request.

To secure your supply chains or facilitate the industrial transfer of your products, we rely on state-of-the-art infrastructure.
The Saint-Bonnet-de-Rochefort site is certified to the FSSC 22000 standard and operates in accordance with the recommendations of the FDA GMP CFR 21-Part 111 standard.
Our responsible approach is underpinned by B Corp certification and by decarbonisation pathways validated by the SBTi for Scopes 1, 2 and 3.

Bespoke development or a white-label formulation: tell us about your project through our qualification form. Our teams will get back to you with an initial feasibility assessment.
Ipowder® is a patented plant extraction process that concentrates a plant’s actives through a 100% aqueous route, then redeposits them onto its own native powder. The result is a 100% plant concentrated infusion, with no added solvent or carrier, which preserves the totum in its entirety.
Unlike a standard dry extract, Ipowder® isolates no single active and uses no drying carrier such as maltodextrin. The process restores the plant’s complete totum and fixes the extract onto its own native powder: no additives, 100% plant labelling.
No. Ipowder® extraction is 100% aqueous, with no organic solvent whatsoever (no hexane, no acetone, no ethanol). The sole extraction medium is water, which reinforces food safety.
One dose of Ipowder® provides the equivalent of 2 to 3 doses of standard plant powder, depending on the reference. This concentration reduces the number of doses while maintaining the intake of compounds of interest.
The Ipowder® extraction process is ECOCERT-certified. An Ipowder® can be organic on two conditions: that the plants used are themselves from organic farming, and that the resulting Ipowder® is also certified organic.
Ipowder® fits into capsules, sachets and tablets, single-layer as well as bilayer. Its 100% plant nature makes clean-label formulation easier across all these forms.